KN-GHS型固化干燥室

簡介：

KN-GHS型全自動固化干燥室用于蓄電池生產中極板的干燥與固化。

此設備可以自動完成極板固化干燥全過程，可根據要求選擇電、煤氣、天然氣等加熱方式，滿足所需的溫度和濕度。

The automatic curing and drying chamber is used for drying ang curing the plates for battery production.This equipment will finish the complete plate curing and drying process automatically,the heating method of electricity,coal gas,and natural  gas can be selected for meeting different of temperature and humidity.

KN-GHS  curing&drying chamber

Introduce:

This chamber is used to plate drying and solidification in battery manufocture.

The equipment can automatically finish the whole pracess of plate solidification and drying.

技術參數：                                Technical Parameters

外形尺寸：                                External Dimension

主箱體：4000mm×4000mm×3000mm       Main Chamber: 4000mm×4000mm×3000mm

有效容積：3200mm×3800mm×2900mm     Valid Volume: 3200mm×3800mm×2900mm

控制精度                                 Control Precision

溫度：±1℃ 濕度：±2%RH                Temperature: ±1℃;Humidity: ±2%RH

加熱方式：電加熱和蒸汽加熱               Heating Method:Electrical heating and steam heating

加濕方式：噴水霧和加蒸汽或用加濕機       Humidifying Method:Electrical heating and steam heating

電源：3相380伏50赫茲                  Electrical Power:3Phases,380V,50HZ

功率：電加熱60-120KW 風機：7.5KW        Power:electrical heating=60~120KW,Blower=7.5KW

蒸汽輔助加濕：30KW                      Steam heating=30KW

水：0.2Mpa~0.4 Mpa                       Water: 0.2Mpa~0.4 Mpa

壓縮空氣：0.4Mpa~0.6Mpa                  Compressed Air: 0.4Mpa~0.6Mpa

蒸汽：≥0.05Mpa                          Steam: ≥0.05Mpa

注：可根據要求選擇加熱方式和加濕方式  Note:Different heating method ang hunidifying method can be selected.